This section presents standard connector adapters for D-Subminiature (Mil-DTL-24308), Micro-D Subminiature (Mil-DTL-83513) and ARINC (MIL-DTL-81659) connectors. Solid and split-shell designs are specified with various mounting screw and mounting screw retention options. EMI/RFI Gasket versions are included. These designs encompass straight, 90°, 45°, and 45°-offset configurations, single and dual entries, and oval banded terminations. The oval entry backshell designs allow for additional wire space or insulation. The 90° configurations offer both side and face mounted entries. Consult factory for other designs, including magnaform and crimp-ring shield sock terminations.

MICRO'D

901-748 - ADAPTER,

Assembly Drawing Pending
	more info

 

901-866 - ADAPTER, EMI/RFI, Shield Termination, Oval Entry Option for MIL-DTL-83513 Micro-D Connector, Straight, 90° and 45° Offset

Assembly Drawing Pending
	more info

 

901-726 - ADAPTER, EMI/RFI, Shield Termination for MIL-DTL-83513 Micro-D Connector, Straight, 90° and 45°

Assembly Drawing Pending
	more info

 

901-778 - ADAPTER, EMI/RFI, Band Termination, Oval Entry Option for MIL-DTL-83513 Micro-D Connector, Straight, 90° and 45° Offset

Assembly Drawing Pending
	more info

 

901-820 ADAPTER, Panel Mount, EMI/RFI, Band Termination, Oval Entry for MIL-DTL-24308 D-SUB Connector, Straight and 90°

Assembly Drawing Pending
	more info

 

901-813 ADAPTER, Panel Mount, EMI/RFI, Band Termination, Straight, 45°, 90° Side, 90° Front MIl-DTL-24308, D-Sub

Assembly Drawing Pending
	more info

 

901-899R - ADAPTER, Panel Mount, EMI/RFI, Band Termination, Low Profile, Oval Entry for MIL-DTL-24308 D-SUB Connector, 90°

Assembly Drawing Pending
	more info

 

900-653 - ADAPTER, EMI/RFI, RCS Termination, Strain Relief, Split Shell for MIL-DTL-24308 D-SUB Connector image

Assembly Drawing Pending
	more info